Description Fast Patch is the ultimate in permanent repair
for concrete floors and surfaces.
  Features
  Benefits
  Uses
 
Description

Fast Patch is a high penetration two-part hybridurethane that combines manufactured sand to form a tough instant polymer concrete.

     
Features
• Extremely low viscosity and properties that allow deep penetration into concrete.
• All materials are self mixed and delivered at the point of application. No messy pot-mixing or wasted product.
• Self-leveling or may be combined with manufactured sand and worked with a trowel.
• Easier cartridge mixing.
• Completely cures in 10 minutes after application at 70° F will also cure rapidly in subzero environments.
• Completely cures to heavy traffic in 15-20 minutes after application at 70°F.
• Excellent bonding strength in a wide temperature range.
• Excellent chemical resistance.
• Low moisture sensitivity, will tolerate small amounts of moisture when applied.
• Bonds well to concrete, brick, tile, steel, asphalt and wood.
• Safe to use. Material reacts quickly and is solvent and odor free with 100% solids and no VOC'S.
• Good flexibility at lower temperatures.
• When combined with manufactured sand, Fast Patch will form a tough 4500 PSI polymer concrete that will stay pliable over time.
     
Benefits
• Long lasting repairs that accommodate harsh physical environments and thermal movement.
• Easy preparation, wire brush is all that is needed in most cases.
• Easy application. All material is self -mixed with specialty design packaging or bulk application equipment.
• No downtime, repairs are fully ready for traffic in about 20 minutes after application.
• Very low odor can be used in a wide range of indoor areas.
• Transfers dynamic loads without fracture.
 
Uses
• Repairing cracks 1/8” or larger that may be subject to deflection, movement, dynamic loading thermal expansion or contraction.
• Filing and protection of control joints.
• Repairing spalls and pop-outs in exterior or interior concrete.
• Forming and repairing bridge joint headers and nosing
• Repairing concrete surface imperfections prior to coating.
• Vertical repairs when combined with specified sand.
• Securing bolts, equipment, or railings into concrete.
• Filling traffic loops.
• Electrical podding.
• Waterproofing